Upload your photos, and feature on our social media!
Upload Your Photos0-9 & A-B
C-D
E-H
M-N
O-R
S-T
PTFE gaskets have the benefit of helping to prevent thermal transfer between castings, and are re-usable, unlike the OEM steel gaskets, reducing heat and lowering costs.
During development it was also found that the steel gaskets would often loose boost under pressure testing. With them replaced with the Orranje PTFE gaskets, this is no longer an issue, as they create a complete seal, ensuring boost is used, not lost!
We recommend using Hylomar Universal Blue as an additional sealant on each sealing face.
Please note that it's not uncommon for MINI castings to have excess material, which differs from casting to casting. Due to the gaskets being thicker than standard, to further prevent thermal transfer, you may find the excess material can foul slightly on other castings once the gaskets are installed. To solve this issue, simply clean off the excess material using a file etc.
Please follow the fitting guide below for installation, as PTFE gaskets have to be installed slightly differently to standard;
These are designed to fit with standard and ported heads, inlets etc.
Upload your photos, and feature on our social media!
Upload Your Photos