Out of stock notices on products and options are manually added and removed. These will not be updated while we are away, so may not be correct. Stock will still be allocated to your order if available, but we will notify you of any backorders upon our return.
We highly recommend ordering on our eBay Shop if you want to make sure you are ordering a stocked item. We update eBay stock automatically behind the scenes, so the stock shown is what we have available.
The Newman camshaft is one of the best camshafts available for the MINI Cooper and MINI Cooper S, increasing both bhp and torque throughout the rev range by allowing the valves to stay open longer, thus increasing the amount of air / fuel entering the cylinders.
To achieve the full potential of the Newman camshaft, we recommend that the car is remapped after installation, however a remap is not always essential. Gains of around 18bhp can be expected from fitting a Newman camshaft, depending on the cam chosen and other mods on the car.
Benefits of fitting a MINI Cooper or MINI Cooper S Newman camshaft include:
Please note this is for the camshaft only, unless the option for the ARP Camshaft Sprocket Bolt has been chosen. If the ARP Camshaft Sprocket Bolt option has been chosen, we may open the ARP packaging and pre-install the bolt in the cam to save on additional packaging.
Orranje recommends the BMWI/250/400 PH2 camshaft from Newman Cams.
| MINI | Part No | Power Band | Notes |
| R50 | BMWI/264/396 PH1 | 2000-6500 |
Road Cam
Good Increase of Low Mid Range Power Smooth Idle For Non Supercharged Engines |
| R50 | BMWI/268/272 PH2 | 2000-6500 |
Fast Road Cam
** New for 2024 ** Good Increase of Mid Range Power. Smooth Idle. For Non Supercharged Engines |
| R50 | BMWI/288/410 PH3 | 3500-7500 |
Fast Road/Tarmac Rally Cam
Fast Road/Tarmac Rally Race Cam For Non Supercharged Engines Please note that this may require a remap to run smoothly |
| R50 | BMWI/300/426 PH4 | 4500-8250 |
Race Cam
A Cam developed for the Track Please note that this may require a remap to run smoothly |
| MINI | Part No | Power Band | Notes |
| R53 | BMWI/246/396 PH1/2 | 1500-6000 |
Road Supercharged Cam
A Cam developed for the Supercharged Cooper S Engine Giving good increased mid range torque, without affecting the tick-over |
| R53 | BMWI/250/400 PH2 | 2000-6500 |
Fast Road Supercharged Cam
A Cam developed for the Supercharged Cooper S Engine Giving good increased mid range torque, without affecting the tick-over *Orranje recommends |
| R53 | BMWI/272/400 PH3/4 | 3000-7000 |
Race Supercharged Cam
A Cam developed for the Supercharged Cooper S Engine For Fast Road Competition Use Please note that this may require a remap to run smoothly |
Please note this is for the camshaft only, unless the option for the ARP Camshaft Sprocket Bolt has been chosen. If the ARP Camshaft Sprocket Bolt option has been chosen, we may open the ARP packaging and pre-install the bolt in the cam to save on additional packaging.