The Newman camshaft is one of the best camshafts available for the MINI One / Cooper, increasing both bhp and torque throughout the rev range by allowing the valves to stay open longer, thus increasing the amount of air / fuel entering the cylinders.
To achieve the full potential of the Newman camshaft, we recommend that the car is remapped after installation, however a remap is not always essential. Gains of around 18bhp can be expected from fitting a Newman camshaft, depending on the cam chosen and other mods on the car.
Benefits of fitting a MINI One / Cooper Newman camshaft include:
Please note this is for the camshaft only, unless the option for the ARP Camshaft Sprocket Bolt has been chosen. If the ARP Camshaft Sprocket Bolt option has been chosen, we may open the ARP packaging and pre-install the bolt in the cam to save on additional packaging.
| MINI | Part No | Power Band | Notes |
| R50 | BMWI/264/396 PH1 | 2000-6500 |
Road Cam Good Increase of Low Mid Range Power Smooth Idle For Non Supercharged Engines |
| R50 | BMWI/268/272 PH2 | 2000-6500 |
Fast Road Cam ** New for 2024 ** Good Increase of Mid Range Power. Smooth Idle. For Non Supercharged Engines |
| R50 | BMWI/288/410 PH3 | 3500-7500 |
Fast Road/Tarmac Rally Cam Fast Road/Tarmac Rally Race Cam For Non Supercharged Engines Please note that this may require a remap to run smoothly |
| R50 | BMWI/300/426 PH4 | 4500-8250 |
Race Cam A Cam developed for the Track Please note that this may require a remap to run smoothly |