Mini Open Ended Locking Wheel Nuts for Wheel Stud Conversion M12x1.5 M14x1.25 R53 R56 F56

Open ended locking wheel nuts with a 60 degree taper. Supplied in sets of 4 with locking key.

For use with stud and nut conversions. These do not replace wheel bolts.

21mm in length, and for use with a 19mm socket. Please note that the key socket has a closed end, which can hit the end of the stud if you're running long studs. A solution to this is to run shorter studs, or by drilling a hole in the end of the key to allow the stud to pass through.  The locking key allows for approx 10mm of stud to be sticking out from the end of the nut.