DevilsOwn Methanol Injection Base Kit 6-30 psi R53 R56
Stock unknown DevilsOwn Methanol Injection DO-BASE_KIT_UNI_3-30
Product Description
Perfect for both the R53 and R56.
We recommend the following setup:
R53 Supercharged - up to 280bhp
- Base Kit 6-30 psi
- 4 quart tank or 2.25 gallon race tank, with low level float switch
- Dual nozzle upgrade - additional pre-charger DO1 nozzle for maximum cooling, plus nozzle mounting adapter (used to install the dual nozzle pre-charger nozzle, in the plastic supercharger inlet pipe)
R56 Turbo - up to 280bhp
- Base Kit 6-30 psi
- 4 quart tank or 2.25 gallon race tank
- Low level warning
- 3mm boost tap
Kit Contents
- 300 psi pump with EPDM seals
- Allen key can be used to adjust water pump pressure
- Adjustable pressure switch (6-30psi markings on switch)
- 15' of High Pressure Black Tubing
- DO2 nozzle / injector - post-intercooler
- Nozzle holder
- Heavy duty nickel plated check valve (or solenoid, if upgrade option chosen)
- Filtered self sealing tank tap
- All fittings needed for installation
- Inline fuse holder with 10 amp fuse
- 30 amp relay which includes the harness
- 10' of red and black wire
- Zip ties and wire splices and connectors
- Alcohol / water injection install instructions with stickers
Solenoid Upgrade
The solenoid upgrade replaces the standard check valve with a solenoid. If you are injecting post TB into a vacuum, you need the electronic solenoid to stop fluid being sucked in. Also, if the nozzle is mounted lower than the pump & tank, the check valve will struggle to hold the fluid back, again making the solenoid an ideal and more reliable solution.
